Product Details:
Payment & Shipping Terms:
|
| Product Name: | Motor Thermal Protector | Contact Capacity: | 125Vac/16A, 250Vac/8A 600Vac/4A 24Vdc/20A |
|---|---|---|---|
| Cycles Life: | 6,000-10,000cycles | Temperature Tolerance: | ±5°C |
| Certifications: | UL,VDE,CE CQC | Applications: | Lighting / Motor / Transformer / PC Board |
| High Light: | thermal protector for motor,thermal overload protector |
||
17AM-D+PTC 250V 8A 125V 10A Motor Thermal protector
A type:Terminals at the same end
B type: Terminals at the opposite end
Description:
17AM-D is a thermally operated snap-action device which delivers the over heat protection with advanced structure, high contact capacity and long cycle life. The operating principle of the 17AM-D is both simple and effective. At the heart of the proctor is a bimetal snap–action disc. When the temperature of this disc reaches its pre-calibrated temperature it snaps open, resulting in an open circuit. This temperature is reached during a fault condition, caused by either an increase in ambient temperature, an increase in current flowing through the discs, or a combination of both. After the 17AM-D breaks the circuit, the system cools and the 17AM-D automatically resets, allowing power to be restored to the circuit.
Specifications
Normally close, open on temperature rise, self-hold, manual reset
|
Normally close, open on temperature rise, automatic reset |
|
|
Contact capacity |
125Vac/16A, 250Vac/8A 600Vac/4A 24Vdc/20A |
|
Cycles life |
6,000-10,000cycles |
|
Open temperature |
50°C to 160°C in increments of 5°C |
|
Temperature Tolerance |
±5°C |
|
Differential Temperature |
depending on open temperature |
|
Seal |
High-seal and low-seal gasket material available |
|
Contact resistance |
≤100 mW |
|
Insulation resistance |
The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C. |
Applications:
Competitive Advantage
|
1. The strongest Chinese manufacturer, TS16949 and ISO14001 recognized. |
|
2. Compact, miniature size. |
|
3. UL,VDE,CE CQC Approved. |
|
4. Individually temperature checked on modern, custom-designed equipments from Japan. |
|
5. Snap–action disc |
|
6. Gasketed steel case suitable for most impregnation processes |
|
7. Professional solutions with wide selection of leads and insulating sleeves |
|
8. Bimetal discs carry circuit current, so it is current and temperature double sensitivity for maximum design flexibility and application |
Contact Person: Miss. Wendy zhang
Tel: 86-519-85920008
Fax: 86-519-85920222
