Product Details:
Payment & Shipping Terms:
|
| Product Name: | Thermal Overload Protector | Contact Capacity: | 125Vac/8A, 250Vac/5A, 24Vdc/8A |
|---|---|---|---|
| Cycles Life: | 6,000 Cycles | Seal: | Epoxy Resin |
| Temperature Tolerance: | ±5°C | Certifications: | UL VDE CE CQC |
| High Light: | thermal overload protection,overload protector |
||
Description:
Changsheng BR-B2D series motor protector is built to meet almost any requirement of protection in a wide range of small motors, small transformers, solenoids, and more. This compact motor protector is the best solution to protect the wide variety of motors under 1 Hp used in industrial and domestic appliances against locked rotor and overload situations.
This motor protector consists of a plastic SPCC housing that holds and protects the inner components against infiltration as well as mechanical deformation. In single–phase motors, the BR-B2D can be mounted directly in the main circuit to serve as an on– or in–winding protector.
Applications:
Specifications:
|
Contact capacity |
125Vac/8A, 250Vac/5A, 24Vdc/8A |
|
Cycles life |
6,000 cycles |
|
Open temperature |
50°C to 150°C in increments of 5°C |
|
Temperature Tolerance |
±5°C |
|
Differential Temperature |
depending on open temperature |
|
Seal |
Epoxy resin |
|
Contact resistance |
≤50 m |
|
Insulation resistance |
The resistance between the leads and insulation sleeve is >100 M with 500 VDC at 25 °C. |
|
Lead wire pull strength |
30 N applied from lead to lead for 5sec. No slip-off or rupture |
Competitive Advantage:
|
1. The strongest Chinese manufacturer, ISO 9001and ISO14001 recognized. |
|
2. Compact, miniature size. |
|
3. UL,VDE,CE CQC Approved. |
|
4. Individually temperature checked on modern, custom-designed equipments from Japan. |
|
5. Snap–action disc, normally on. |
|
6. Epoxy resin |
|
7. Bimetal discs carry circuit current, so it is current and temperature double sensitivity for maximum design flexibility and application |
BR-B2D with standard plastic case
1. Encloure ( plastic case) 2. Insulator 3. Bimetal disc 4. movable contact
5. Stationary plate 6. Stationarycontact 7. Filling (Epoxy resin) 8. Lead wire
Contact Person: Miss. Wendy zhang
Tel: 86-519-85920008
Fax: 86-519-85920222
