Product Details:
Payment & Shipping Terms:
|
Body Material: | Bakelite Or Cermaic | Terminal Orientation: | 90 Or 180 Or 30 Or 45 Degree |
---|---|---|---|
Terminal Size: | 6.3*0.8 Or 4.75*0.5 | ||
High Light: | thermal overload protection,thermal overload protectors |
Breaker For Electric Heater , Snap-Action Thermostat bimetal disc KSD 301
Key Specification
Detailed Product Description
1. Auto/ manual 10A/250V
2. Bakelite body or ceramic body
3. Vertical or horizontal terminal
Detailed Product Description
Applications of KSD301 Thermostat
1. Water dispenser, Electric heater, Sandwich toasters, Dishwashers, Dryers, Disinfection cabinet, Microwave ovens, Electric coffee pot, Electric Caldron, Refrigerator, Air conditioning gluing machine
2. Office equipment
3. The seat heaters
Advantages of KSD301 Thermostat
1. Stable performance
2. High accuracy
3. Mini-size, light
4. High reliability and long lifespan
5. Little radio interference
6. Less flashover
Special features of KSD301 Thermostat
Temperature sensing components consist of bimetallic strip. When the temperature reached the action temperature range, it will jump quickly and the movable disc disconnects. When the temperature declines to a fixed temperature point, the contact point cannot reset until reconnecting the circuit by pushing the reset button. And then the contact points recover , reaching a purpose of connecting or disconnecting the circuit and restarting the circuit by manual reset. (Kindly reminder: 1.This type of manual reset thermostat can reset when the temperature declines 20 ℃ after snap action by pressing the reset button. And 4~6 N will be advisable, please don’t use too much strength. 2. To ensure the normal function, the distance between the reset button and the close cover should not be less than 20.4mm. )
Applications:
Specification
|
|
Rated voltage and current |
16A/125VAC,10A/250VAC 50HZ/60HZ |
Cycles life |
100, 000 cycles |
Terminal |
6.35*0.8, 4.8*0.5. |
Available Calibration Ranges |
40℃ up to 180℃,tolerance ±5℃(insulation material PPS) |
Available Calibration Ranges |
40℃ up t o 220℃,tolerance ±5℃(insulation material 95 ceramics ) |
Standard Differential |
up to 40° C below the min. switching temperature limit lowest limit 30° C. Other values on request |
Pull strength |
≥80N, no slip off |
Dielectric Strength Terminal to Cap |
2000 V eff, 50 HZ |
Contact resistance |
≤100 mW |
Min. Rate of Temp. Rise |
0,5° C /min |
Ambient Temperature Limits |
0° up to 200° |
|
|
Competitive Advantage:
|
|
Tracking Resistance of Base Material PTI ≥ 250 V |
Contact Person: Miss. Wendy zhang
Tel: 86-519-85920008
Fax: 86-519-85920222